[Mechanical Design, Manufacturing and Automation] 4.CNC Machining Technology
#ICT# #IOT#

Lesson Code: TCEN2026J001

Clicks:
Academic Hours
4.30hours
Publish Date
Nov 2026

Lecturer

1. Lecturer ZHU LiangHebei Vocational University of Technology and Engineering

2. Lecturer LIU DehuaHebei Vocational University of Technology and Engineering

3. Lecturer PU JunguoHebei Vocational University of Technology and Engineering

4. Lecturer MA ShaolongHebei Vocational University of Technology and Engineering

5. Lecturer ZHU CeceHebei Vocational University of Technology and Engineering

6. Lecturer ZHANG YanqiangHebei Vocational University of Technology and Engineering

7. Lecturer HUANG ShanHebei Vocational University of Technology and Engineering

8. Lecturer CAO GuohuiHebei Vocational University of Technology and Engineering

General Introduction
This course focuses on cultivating students’ basic competencies in CNC machining and programming. It mainly covers fundamental CNC concepts, CNC lathe programming and
machining, and machining center programming and machining. It provides a foundation for students to undertake tasks such as CNC process planning, programming, and machining.

This Course is for
1. Helping trainees become familiar with the basic principles of CNC machining and the structure of CNC machine tools.
2. Equipping trainees with the methods and procedures for CNC turning programming and machining.
3. Enabling trainees to master the methods and procedures for milling programming and machining on machining centers.

Learning Materials

1. Corresponding PPT
2. Online Course Video
3. Simulation Question Bank

Recognized By

Benefits of Learning

1. Understanding and following CNC machining safety standards and professional ethics, and demonstrating a strong awareness of quality and standardized operations.
2. Being able to interpret drawings of moderately complex parts, conduct machining process analysis, select appropriate cutting tools, fixtures, and measuring instruments, determine suitable cutting parameters, and plan machining routes and tool paths.
3. Understanding CNC programming principles and being able to manually create, verify, and optimize CNC machining programs using coordinate systems, basic machining commands, canned cycle commands, and tool compensation commands.
4. Being able to complete CNC machining program development, verification, transmission, and machining simulation for moderately complex parts.
5. Understanding CNC machine tool operating procedures and being able to operate CNC machine tools to machine parts, perform dimensional inspections, and conduct quality analysis.
6. Being able to demonstrate teamwork, effective communication, and continuous learning skills to meet the requirements of CNC programming and machining positions.

Courses Videos
0 Principles of CNC Machining and Types of CNC Machine Tools.mp4play1.1 Applications and Types of CNC Lathe.mp4play1.2 Structure of CNC Lathes.mp4play1.3 Common Tools for CNC Lathes.mp4play1.4 Coordinate Systems of CNC Lathes.mp4play1.5 CNC Lathe Program Structure.mp4play2.1 CNC Lathe Programming Concepts.mp4play2.2 Linear Motion Commands G00 and G01.mp4play2.3 Circular Interpolation Commands G02 and G03.mp4play3.1 Simple OD-ID Turning Cycle G90.mp4play3.2 Simple Facing Cycle G94.mp4play3.3 OD-ID Roughing Cycle G71 and Finishing Cycle G70.mp4play3.4 Face Roughing Cycle G72.mp4play3.5 Pattern-Repeating Roughing Cycle G73.mp4play4.1 Thread Machining Process.mp4play4.2 Single-Pass Threading Command G32.mp4play4.3 Simple Threading Cycle G92.mp4play4.4 CNC Turning of Shafts - Comprehensive Programming Example.mp4play5.1 Applications and Types of CNC Mills and Machining Centers.mp4play5.2 Structure of CNC Mills and Machining Centers.mp4play5.3 Common Tools for CNC Mills and Machining Centers.mp4play5.4 Coordinate Systems of CNC Mills and Machining Centers.mp4play5.5 Program Structure for CNC Mills and Machining Centers.mp4play6.1 Face and Slot Milling with G00 and G01.mp4play6.2 Arc Contour Milling with G02 and G03.mp4play6.3 Introduction to Cutter Radius Compensation G41 G42 G40.mp4play6.4 Applying Cutter Radius Compensation G41 G42 G40.mp4play7.1 Programming Simple Holes CYCLE81 and CYCLE82.mp4play7.2 Programming Deep Holes CYCLE83.mp4play7.3 Programming Tapped Holes CYCLE84.mp4play7.4 Comprehensive CNC Milling.mp4play

Downloads
Please log in and download